Toyota 2005 HIGHLANDER Service Manual Download Page 261

Page: 261 / 423

’05 HIGHLANDER_U (L/O 0409)

261

2005 HIGHLANDER from Nov. ’04 Prod. (OM48570U)

1. Main switch

Push the switch to turn the rear heater
system on or off.

Turning the fan speed selector to the “LO”
or “HI” position with the rear heater sys-
tem on illuminates the main switch indica-
tor.

2. Fan speed selector

Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.

When the rear heater system is off, the
fan speed selector will not operate.

3. Rear heater vents

Air flows from the vents when the rear
heater system is operating.

CAUTION

Do not place feet near the vents for
long periods as burns may result.

Rear heater system

Summary of Contents for 2005 HIGHLANDER








































































































































































































































































































































































































































Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands

Toyota 2005 HIGHLANDER, Service Manual

Search results

Summary of Contents for 2005 HIGHLANDER

Reviews:

Related manuals for 2005 HIGHLANDER

Brands by name

Popular brands