Toyota 2005 ECHO User Manual Download Page 414

Page: 414 / 433

243

2005 ECHO from Aug. ’04 Prod. (OM52636U)

—Headlights

SU73036a

1. Unplug the connector. Remove the

rubber cover.

If the connector is tight, wiggle it.

SU73037a

2. Release the bulb retaining spring

and remove the bulb. Install a new
bulb and the bulb retaining spring.

To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.

SU73057

3. Install the rubber cover as shown

and fit it securely on the boss. Plug
in the connector.

Make sure the rubber cover fits securely
on the connector and the headlight body.

Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.

Summary of Contents for 2005 ECHO


















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 ECHO

Reviews:

Toyota 2005 ECHO, User Manual, Page: 414 / 433

Search results

Summary of Contents for 2005 ECHO

Reviews: