Home
/
Toyota
/
2005 ECHO
/
User Manual

Toyota 2005 ECHO, User Manual, Page: 109 / 433

Share

Page: 109 / 433

Toyota 2005 ECHO User Manual Download Page 109

65

2005 ECHO from Aug. ’04 Prod. (OM52636U)

SU13050

4. To remove the convertible seat, press

the buckle release button and allow the
belt to retract completely. The belt will
move freely again and be ready to
work for an adult or older child passen-
ger.

SU13051

(C) BOOSTER SEAT INSTALLATION

A booster seat must be used in for-
ward- facing position only.

SU13052

Move seat
fully back

CAUTION

A forward- facing child restraint sys-
tem should be allowed to be
installed on the front passenger
seat only when it is unavoidable.
Always move the seat as far back
as possible, because the front pas-
senger airbag could inflate with
considerable speed and force.
Otherwise, the child may be killed
or seriously injured.

«
...
107
108
109
110
111
...
»

Summary of Contents for 2005 ECHO


















































































































































































































































































































































































































































Reviews:

No comments