Home
/
Toyota
/
2005 ECHO
/
User Manual

Toyota 2005 ECHO, User Manual, Page: 377 / 433

Share

Page: 377 / 433

Toyota 2005 ECHO User Manual Download Page 377

204

2005 ECHO from Aug. ’04 Prod. (OM52636U)

Aluminum wheels: Use only a mild soap
or neutral detergent.

Plastic bumpers: Wash carefully. Do not
scrub with abrasive cleaners. The bumper
faces are soft.

Road tar: Remove with turpentine or
cleaners that are marked safe for painted
surfaces.

NOTICE

Do not use organic substances (gaso-
line, kerosene, benzine or strong sol-
vents), which may be toxic or cause
damage.

3. Rinse thoroughly—dried soap can

cause streaking. In hot weather you
may need to rinse each section right
after you wash it.

4. To prevent water spots, dry the vehicle

using a clean soft cotton towel. Do not
rub or press hard—you might scratch
the paint.

Automatic car wash

Your vehicle may be washed in an auto-
matic car wash, but remember that the
paint can be scratched by some types of
brushes, unfiltered washing water, or the
washing process itself. Scratching reduces
paint durability and gloss, especially on
darker colors. The manager of the car
wash should be able to advise you wheth-
er the process is safe for the paint on
your vehicle.

NOTICE

To prevent damage to the antenna,
make sure it is retracted before driv-
ing your Toyota through an automatic
car wash.

Waxing your Toyota

Polishing and waxing is recommended
to maintain the original beauty of your
Toyota’s finish.

Apply wax once a month or if the vehicle
surface does not repel water well.

1. Always wash and dry the vehicle be-

fore you begin waxing, even if you are
using a combined cleaner and wax.

2. Use a good quality polish and wax. If

the finish has become extremely weath-
ered, use a car- cleaning polish, fol-
lowed by a separate wax. Carefully fol-
low the manufacturer’s instructions and
precautions. Be sure to polish and wax
the chrome trim as well as the paint.

3. Wax the vehicle again when water

does not bead but remains on the sur-
face in large patches.

NOTICE

Always remove the plastic bumpers if
your vehicle is re- painted and placed
in a high heat paint waxing booth.
High temperatures could damage the
bumpers.

«
...
375
376
377
378
379
...
»

Summary of Contents for 2005 ECHO


















































































































































































































































































































































































































































Reviews:

No comments