Toyota 2004 MR2 Spyder Owner'S Manual Download Page 160

Page: 160 / 258

152

2004 MR2 from Feb. ’04 Prod. (OM17518U)

Types of tires

Determine what kind of tires your

vehicle is originally equipped with.

1. Summer tires

Summer tires are high

−

speed capabil-

ity tires best suited to highway driving

under dry conditions.
Since summer tires do not have the

same traction performance as snow

tires, summer tires are inadequate for

driving on snow

−

covered or icy roads.

For driving on snow

−

covered or icy

roads, we recommend using snow

tires. If installing snow tires, be sure

to replace all four tires.

2. All season tires

All season tires are designed to pro-

vide better traction in snow and to be

adequate for driving in most winter

conditions, as well as for use all year

round.

CAUTION

Do not mix summer and all sea-

son tires on your vehicle as

this can cause dangerous han-

dling characteristics, resulting

in loss of control.

Do not use tires other than the

manufacture’s

designated

tires, and never mix tires or

wheels of the sizes different

from the originals as this can

cause dangerous handling

characteristics, resulting in

loss of control.

03 12.25

Summary of Contents for 2004 MR2 Spyder



































































































































































































































































Search results

Summary of Contents for 2004 MR2 Spyder

Reviews:

Related manuals for 2004 MR2 Spyder

Brands by name

Popular brands

Toyota 2004 MR2 Spyder, Owner'S Manual

Search results

Summary of Contents for 2004 MR2 Spyder

Reviews:

Related manuals for 2004 MR2 Spyder

Brands by name

Popular brands