Toyota 2004 MR2 Spyder Owner'S Manual Download Page 225

Page: 225 / 258

218

2004 MR2 from Feb. ’04 Prod. (OM17518U)

Toyota recommends all four tires,

or at least both front or rear tires

be replaced at a time as a set.

See “If you have a flat tire—” on page

167 in Section 4 for tire change proce-

dure.

When a tire is replaced, the wheel

should always be balanced.

An unbalanced wheel may affect ve-

hicle handling and tire life. Wheels

can get out of balance with regular

use and should therefore be balanced

occasionally.

When replacing a tubeless tire, the

air valve should also be replaced

with a new one.

Rotating tires

SB72017

Turning direction

Turning direction indicators

SB72019

Do not rotate the tires as the tire

sizes are different such as with

front to rear, left to right or using

the spare tire. Performing such tire

rotation may result in the tires in-

terfering with the body or in un-

even wear of the tires, so that

steerability of the vehicle is im-

paired.

Tires with turning direction indicator—
The tire is a uni

−

directional type and

cannot be used for tire rotation. Using

the tire on the opposite side to the

designated side will impair the tire

performance.
The spare tire—
The tire is designed for temporary use

only and cannot be used for tire rota-

tion.

03 12.25

Summary of Contents for 2004 MR2 Spyder



































































































































































































































































Search results

Summary of Contents for 2004 MR2 Spyder

Reviews:

Related manuals for 2004 MR2 Spyder

Brands by name

Popular brands

Toyota 2004 MR2 Spyder, Owner'S Manual

Search results

Summary of Contents for 2004 MR2 Spyder

Reviews:

Related manuals for 2004 MR2 Spyder

Brands by name

Popular brands