Toyota 2002 Tundra Owner'S Manual Download

Page: 99 / 298

’02 TUNDRA_U (L/O 0108)

2002 MY TUNDRA_U (OM34417U)

Do this.

If the indicator or
buzzer comes on...

(g)

Fill up tank.

(f)

Take vehicle to
Toyota dealer.

(h)

Take vehicle to
Toyota dealer.

(i)

Close all doors.

(j)

Take vehicle to
Toyota dealer
immediately.

Do this.

If the indicator or
buzzer comes on...

(k)

Shift front drive
control lever out of

“N”.

(l)

Stop and check.

(m)

Add washer fluid.

(n)

Remove key.

Key reminder
buzzer

(o)

Shift the transfer
mode again,
correctly.

Four–wheel
drive system
warning
buzzer

(a) Brake System Warning Light

This light comes on in the following cases
when the ignition key is in the “ON” posi-
tion.

When the parking brake is applied...

When the brake fluid level is low...

CAUTION

It is dangerous to continue driving
normally when the brake fluid level is
low.

Have your vehicle checked at your
Toyota dealer in the following case:

The  light  does  not  come  on  even  if  the
parking  brake  is  applied  when  the  igni-
tion  key  is  in  the  “ON”  position.

Summary of Contents for 2002 Tundra











































































































































































































































































































Search results

Summary of Contents for 2002 Tundra

Reviews:

Related manuals for 2002 Tundra

Brands by name

Popular brands

Toyota 2002 Tundra, Owner'S Manual

Search results

Summary of Contents for 2002 Tundra

Reviews:

Related manuals for 2002 Tundra

Brands by name

Popular brands