Toyota 2002 Tundra Owner'S Manual Download Page 182

Page: 182 / 298

’02 TUNDRA_U (L/O 0108)

175

2002 MY TUNDRA_U (OM34417U)

NOTICE

Do  not  use  gasohol  other  than
stated  above.  It  will  cause  fuel  sys-
tem  damage  or  vehicle  performance
problems.

If driveability problems occur (poor
hot

starting,

vaporizing,

engine

knock, etc.), discontinue the use.

Take  care  not  to  spill  gasohol  dur-
ing  refueling.  Gasohol  may  cause
paint  damage.

FUEL TANK CAPACITY

100 L (26.4 gal., 22.0 Imp. gal.)

If you plan to drive your Toyota in
another country...

First,

comply with the vehicle registration

laws.

Second,

confirm the availability of the cor-

rect fuel (unleaded and minimum octane
number).

5VZ–FE engine

2UZ–FE engine

Operation in foreign countries

Three–way catalytic converters

Summary of Contents for 2002 Tundra











































































































































































































































































































Search results

Summary of Contents for 2002 Tundra

Reviews:

Brands by name

Popular brands

Toyota 2002 Tundra, Owner'S Manual

Search results

Summary of Contents for 2002 Tundra

Reviews:

Brands by name

Popular brands