Toyota 2002 Tundra Owner'S Manual Download

Page: 274 / 298

’02 TUNDRA_U (L/O 0108)

267

2002 MY TUNDRA_U (OM34417U)

1. Open the hood. Unplug the connec-

tor. Remove the rubber cover.

If the connector is tight, wiggle it.

2. Release the bulb retaining spring

and remove the bulb. Install a new
bulb and the bulb retaining spring.

To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.

“TOP PULL” mark

3. Install the rubber cover with the

“TOP

PULL”

mark

upward

and

snuggle on the boss. Then plug in
the connector.

Make sure the rubber cover fits snugly on
the connector and the headlight body.

Aiming  is  not  necessary  after  replacing
the  bulb.  When  aiming  adjustment  is  nec-
essary,  contact  your  Toyota  dealer.

—Headlights

Summary of Contents for 2002 Tundra











































































































































































































































































































Search results

Summary of Contents for 2002 Tundra

Reviews:

Related manuals for 2002 Tundra

Brands by name

Popular brands

Toyota 2002 Tundra, Owner'S Manual

Search results

Summary of Contents for 2002 Tundra

Reviews:

Related manuals for 2002 Tundra

Brands by name

Popular brands