Toyota 2000 Tundra Owner'S Manual Download Page 16

Page: 16 / 250

TUNDRA (34413U)

Rear window

To open the rear window, push the le-
ver and slide the window.

After closing the window, make sure it is
completely closed.

Tailgate

OPENING

To open the tailgate, pull the handle up.

The support cables will hold the tailgate
horizontal.

See  “Luggage  stowage  precautions”  in
Part  2  for  precautions  to  observe  for  load-
ing  luggage.

After closing the tailgate, try pulling and
pushing it to make sure it is securely
closed.

NOTICE

Avoid driving with the tailgate open.

Support cable bracket

REMOVAL

1. Open the tailgate to the angle where

you  can  release  the  brackets  on  the
support  cables  from  the  lugs  on
both  sides.

To release the support cable bracket, lift
it up and slide it off.

Summary of Contents for 2000 Tundra



























































































































































































































































Search results

Summary of Contents for 2000 Tundra

Reviews:

Brands by name

Popular brands

Toyota 2000 Tundra, Owner'S Manual

Search results

Summary of Contents for 2000 Tundra

Reviews:

Brands by name

Popular brands