Toyota 2000 Tundra Owner'S Manual Download

Page: 149 / 250

TUNDRA (34413U)

147

Fan speed selector

Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.

Temperature selector

Turn the knob to adjust the temperature—
to the right to warm, to the left to cool.

Air flow selector

Turn the knob to select the vents used for
air flow.

1. Panel—

Air

flows

mainly

from

the

instrument panel vents.

2. Bi- level—

Air flows from both the floor

vents and the instrument panel vents.

3. Floor—

Air flows mainly from the floor

vents.

4. Floor/Windshield—

Air

flows

mainly

from the floor vents and windshield
vents.

5. Windshield—

Air flows mainly from the

windshield vents.

For details about air flow selector settings,
see the illustration after “A/C” button.

Vehicles with “A/C” button—

Turning  the  air  flow  selector  to  windshield
position  turns  on  the  defroster  to  clear  the
front  view  more  quickly.

Air intake selector

The air intake selector button is used to
switch the air intake

FRESH

mode that

draws outside air into the system and

RE-

CIRCULATED

mode that recirculates the

air inside vehicle.

To turn the air source to

RECIRCULATED

mode, press the button. The indicator will
come on. To turn the air source to

FRESH

mode, press the button again. The indica-
tor will go off.

When the air flow selector is positioned in
windshield or floor/windshield position, the

FRESH

mode

is automatically selected.

(At this time, the mode can’t be turned to

RECIRCULATED

mode manually.) This is

not a malfunction.

“A/C” button

To  turn  on  the  air  conditioning,  press  the
“A/C”  button.  The  “A/C”  button  indicator
will  come  on.  To  turn  the  air  conditioning
off,  press  the  button  again.

Summary of Contents for 2000 Tundra



























































































































































































































































Search results

Summary of Contents for 2000 Tundra

Reviews:

Related manuals for 2000 Tundra

Brands by name

Popular brands

Toyota 2000 Tundra, Owner'S Manual

Search results

Summary of Contents for 2000 Tundra

Reviews:

Related manuals for 2000 Tundra

Brands by name

Popular brands