Toyota 1998 Celica Owner'S Manual Download Page 146

Page: 146 / 204

CELICA

146

(a) Towing with wheel lift type truck
From front—

Release the parking brake.

NOTICE

When lifting wheels, take care to en-
sure adequate ground clearance for

towing at the opposite end of the

raised vehicle. Otherwise, the bumper
and/or underbody of the towed vehicle

will be damaged during towing.

From rear—

Manual transmission:
We recommend using a towing dolly

under the front wheels. If you do not

use a towing dolly, place the ignition
key in the ”ACC” position and put the

transmission in neutral.

NOTICE

Do not tow with the key removed

or in the ”LOCK” position when

towing from the rear without a

towing dolly. The steering lock

mechanism is not strong enough

to hold the front wheels straight.

Automatic transmission:
Use a towing dolly under the front

wheels.

NOTICE

Never tow a vehicle with an auto-

matic transmission from the rear

with the front wheels on the

ground, as this may cause serious

damage to the transmission.

(b) Using flat bed truck

(c) Towing with sling type truck

NOTICE

Do not tow with sling type truck, ei-

ther from the front or rear. This may

cause body damage.

Summary of Contents for 1998 Celica













































































































































































































Search results

Summary of Contents for 1998 Celica

Reviews:

Related manuals for 1998 Celica

Brands by name

Popular brands

Toyota 1998 Celica, Owner'S Manual

Search results

Summary of Contents for 1998 Celica

Reviews:

Related manuals for 1998 Celica

Brands by name

Popular brands