Toyota 1998 Celica Owner'S Manual Download Page 132

Page: 132 / 204

CELICA

132

Keep the bottom of your vehicle free

from mud, etc.

This not only lessens

weight but also helps prevent corro-

sion.

Keep your vehicle tuned

−

up and in

top shape.

A dirty air cleaner,

improper valve clearance, dirty plugs,

dirty oil and grease, brakes not

adjusted, etc. all lower engine perfor-

mance and contribute to poor fuel

economy. For longer life of all parts

and lower operating costs, keep all

maintenance work on schedule, and if

you often drive under severe condi-

tions, see that your vehicle receives

more frequent maintenance (For sched-

uled maintenance information, please

refer to the separate ”Owner’s Manual

Supplement/Maintenance Schedule”).

CAUTION

Never turn off the engine to coast
down hills. Your power steering and

brake booster will not function with-

out the engine running. Also, the
emission control system operates

properly only when the engine is run-

ning.

Summary of Contents for 1998 Celica













































































































































































































Search results

Summary of Contents for 1998 Celica

Reviews:

Related manuals for 1998 Celica

Brands by name

Popular brands

Toyota 1998 Celica, Owner'S Manual

Search results

Summary of Contents for 1998 Celica

Reviews:

Related manuals for 1998 Celica

Brands by name

Popular brands