Toyota 1991 CAMRY Body Section, Repair Manual

Page: 34 / 111

mm in.
50
200 1.97
7.87
FRONT BODY PILLAR (CUT)
REMOVAL
200 mm or move
[Cut and Join Location]
Cut and Join Location
50 mm or
more
Make an incision
Front Body Pillar Lower Gusset
Roof Drip Channel
Cut with a disc
sander etc.
3) Before cutting, remove the antenna cord and
drain hole of the moonroof.
2. Remove the weld points of the roof drip channel,
make an incision of it and bend it.
1. Cut and join the new part at the location as
shown above.
NOTE:
1) Avoid the antenna installation hole for the
cut and join location.
2) As shown above, cut and join the front body
pillar outer and inner panels at a position
shifted above 50 mm (1.97 in.).
BODY PANEL REPLACEMENT RE-16