T-SB-0014-15
March 27, 2015
Page 12 of 12
Reception Diagnosis Using Antenna Test Kit
Repair Procedure (Continued)
Repair Procedure
Data Communication Module (DCM) / Safety Connect Reception (Continued)
3. Connect the GPS antenna from the Antenna Test Kit to the back of the DCM and repeat step 1.
HINT
The DCM antenna uses the same connector as the navigation ECU.
Figure 7. GPS Antenna and Conversion Cable
Did the call center provide the correct location of the vehicle within 100 meters accuracy?
• YES — Continue to step 4.
• NO — Replace the DCM. (Refer to applicable Repair Manual for instructions.)
4. Check GPS antenna cable continuity.
• If GPS antenna cable has less than 1 ohm resistance, replace the GPS antenna. (Refer to
applicable Repair Manual for instructions.)
• If GPS antenna cable resistance is greater than 1 ohm, replace the GPS antenna cable
assembly. (Refer to applicable Repair Manual for instructions.)
5. Repeat step 1 to confirm proper Safety Connect operation.
© 2015 Toyota Motor Sales, USA