TOYODenki VF66R, Operating Manual

Page: 53 / 156

53
Area c (multifunction input/output related setting area)
Display Contents
Used in
120-degree
conduction mode
c-00 Multifunction input source selection ○
c-01 Multifunction input terminal (6) [MI6] function selection ○
c-02 Multifunction input terminal (7) [MI7] function selection ○
c-03 Multifunction input terminal (8) [MI8] function selection ○
c-04 Multifunction input terminal (9) [MI9] function selection ○
c-05 Multifunction input terminal (10) [MI10] function selection ○
c-06 Multifunction input terminal (11) [MI11] function selection ○
c-07 Multifunction output terminal (3) [MO3] function selection ○
c-08 Multifunction output terminal (4) [MO4] function selection ○
c-09 Integrated power setting rate ○
c-10 Output pulse width upon arrival of integrated power setting ○
c-11 Overload pre-alarm operation level setting ○
c-12 Multifunction input terminal (1) [MI1] function selection ○
Area d (converter operation setting area)
Display Contents
Used in
120-degree
conduction mode
d-00 DC voltage command fixed mode selection x
d-01 DC voltage command gain x
d-02 DC voltage command upper limit x
d-03 DC voltage command lower limit x
d-04 Soft start time x
d-05 For special adjustment * x
d-06 For special adjustment
*
x
d-07 For special adjustment
*
x
d-08 For special adjustment
*
x
* This is for special adjustment only. Do not use it usually.
Area E (control gain setting area)
Display Contents
Used in
120-degree
conduction mode
E-00 AC current control proportional gain x
E-01 AC current control differential gain x
E-02 AC current control integral gain x
E-03 DC voltage control basic proportional gain x
E-04 DC voltage control maximum proportional gain x
E-05 DC voltage control proportional gain variable ramp rate x
E-06 DC voltage control proportional gain variable start voltage x
E-07 DC voltage control integral gain x
E-08 Unused x
E-09 Unused x
E-10 Active current command upper limit x
E-11 Active current command lower limit x
E-12 Reactive current command upper limit x
E-13 Reactive current command lower limit x
E-14 PLL proportional gain x