100001021-50
TOP STANDOFFS
Figure 7: TCWS54D Stand offs.
Figure 8: TCWS54D Possible locations.
The standoffs are shipped loose inside the fireplace and must be installed on the top and the side of the fireplace as shown
in Figure 7. Do this once the fireplace is on site and in position.
In planning the installation for the fireplace, it is necessary to determine where the unit is to be installed, location of vent system and
where gas supply piping may be plumbed. Various installations are possible, such as, into an existing wall, a corner, a built-in wall or a
wall projection (Figure 9). Due to high temperatures, do not locate this fireplace in areas of high traffic or near furniture or draperies.
The minimum clearances from the fireplace to combustible surfaces must be adhered to and are shown in Figure 2 and Figure 3.
HANDLE
7
TCWS54D2 091418-40
Locating The Fireplace
Top Standoffs
CONTROL
BOX
