100001021-50
Figure 27: Town and Country
wall switch.
Figure 28: Wall switch - interface side.
Linking the remote control
unit to the wall switch.
1. Begin by moving the selector
toggle on the wall switch to the
“REMOTE” position.
2. Insert a straightened paper clip
into the “PROGRAM” slot on the
wall switch.
3. Press the internal “PROGRAM”
button once and wait until you
hear 3 beeps from the wall switch.
4. Press the ON/OFF button of the
remote unit. Once the wall unit
beeps 3 times, the remote is pro-
grammed.
5. The toggle on the wall switch
must be kept in the “REMOTE”
position in order to use the remote
control unit.
TO FIREPLACE
Wall Switch and Remote Control
Figure 29: Wall switch - battery side.
Wall Switch to IFC Communication Cable Continuity Check
It is important that the continuity of the individual wires encased within the communication cable be checked
before the cable is plugged into both the wall switch and the IFC Module. This will ensure that the cable is
in good condition before the cable is walled in or otherwise covered up. Provided that no staples, screws
or nails accidentally impale the cable during the walling up process, or any cables have otherwise been cut,
the cable itself will be able to be ruled out as a possible cause should trouble shooting the wall switch be
required.
16
TCWS54D2 091418-40
