Thermostatic Mode
(Only for use where permitted)
(Operates the fi replace within a set tem-
perature range)
The fi replace is shipped with thermostatic
mode function deactivated. If this function
is permitted for use in your area it can be
activated by depressing the recessed button
on the
underside of the hand held remote
.
(Fig 55) Once activated the thermostat symbol
(Fig 56) will be displayed when the thermostat
button is pressed.
To activate a set point temperature:
1.
Press the thermostat button to activate
the thermostat mode. The temperature
and thermostat symbols will appear.
2.
Press and hold the thermostat button
on the lower right hand side of the hand
held remote for 5 seconds. (Fig #57) The
temperature icon on the display will fl ash.
(Fig #58)
3.
While the temperature icon is fl ashing
use the up and down arrows to set the
temperature to the desired setting.
4.
Once the desired setting is reached,
press the OK button. If the OK button is
not pressed the icon will continue to fl ash
for 5 seconds and then set itself to the
temperature displayed.
5.
The fi replace is now in thermostatic mode.
To exit the thermostatic mode press the
program, manual or timer buttons. Please
note that the fi rst press of the manual
button will turn the fi replace off.
THERMOSTATIC MODE
BUTTON
Fig. #56
THERMOSTAT SYMBOL
THERMOSTATIC BUTTON
Fig. #55
Fig. #57
TEMPERATURE SETTING
Fig. #58
32
TC36_CSTE 071010-44
Summary of Contents for TC36 SEE-THRUC SERIES
Page 40: ...40 TC36_CSTE 071010 44 Notes ...
Page 41: ...41 TC36_CSTE 071010 44 Notes ...
Page 42: ...42 TC36_CSTE 071010 44 Notes ...
