Receiver Antenn
a
Antenn
a
T
ub
e
Antenn
a
Mo
u
nt
• Remove the radio box lid from the radio box.
• Remove the receiver battery
holder from the receiver cover.
• Install (4) “AA” batteries, making sure polarity
is correct.
• Reinstall the receiver battery holder.
• Secure the radio box lid to the radio box with
the clips provided.
AA
–
+
–
+
+
–
+
–
+
–
+
–
–
+
–
+
AA
AA
AA
AA
AA
AA
AA
S
T
TH
S
T
TH
R
N
“AA
”
“
AA
”
Receiver
B
a
ttery
Holder
R
a
dio
Box Lid
R
a
dio Box
Clip
s
• Install eight “AA” batteries into transmitter, making sure the polarity is correct.
• Insert the antenna into the top of the transmitter and tighten.
• Turn the transmitter on and check the battery light.
• If both LED’s light up, the batteries are acceptable. If only the red LED lights
up, immediately replace the batteries.
4
RECEIVER B
RECEIVER B
A
A
TTER
TTER
Y INST
Y INST
ALLA
ALLA
TION
TION
TRANSMITTER PREP
TRANSMITTER PREP
ARA
ARA
TION
TION
RECEIVER ANTENNA INST
RECEIVER ANTENNA INST
ALLA
ALLA
TION
TION
DO NO
DO NO
T
T
CUT
CUT
THE
THE
ANTENNA
ANTENNA
WIRE!!
WIRE!!
• Uncoil and straighten the antenna wire.
• Route the receiver antenna wire through
the antenna tube.
• Install the tube into the antenna mount.
• Secure the excess antenna wire to the
side of the antenna tube with tape or a
short [3mm] length of fuel tubing by
slipping it over the antenna tube and wire.
