11
Use threadlock on all
metal to metal screws.
Make sure all bearings
are fully seated.
Apply a small amount
of shock oil to the
shock seals before
installing them into
the shock body.
Apply a small
amount of shock oil
to the shock shaft
before installing it into
the shock seals.
Completely fill the
shock body with oil.
Slowly work the
piston up and down
to remove all air
bubbles before slowly
tightening the shock cap.
Flanged side must face
away from the spur gear.
Front
Rear
CENTER
CENTER
TRANSMISSION
TRANSMISSION
SHOCK ASSEMBL
SHOCK ASSEMBL
Y GUIDE
Y GUIDE