8
Read all instructions and safety information carefully before first use. Please retain
this information for future reference.
1. Remove the product from the box.
2. Remove any packaging from the product.
3. Please retain all packaging until you have checked and counted all the parts
and the contents against the parts list.
4. Assemble the unit, as instructed below.
5. Prepare the carpet. To do this, remove as much furniture from the room as
possible. Alternatively, cover any furniture in the surrounding area with a
protective cover or cloth.
6. Vacuum the carpet thoroughly.
7. Test a small area of the carpet for colour fastness. To do this, dampen a cloth
with the included carpet cleaning solution, rub it gently over the small test
area and check for any colour bleeding. If the cloth remains clean and there is
no colour bleeding, the carpet is safe to clean.
8. Dispose of the packaging in a responsible manner.
4 - Before First Use
Assembly :
1. To use the unit, begin by assembling it. To do this, begin by setting it in an
upright position
2. Once the appliance is upright, place the handle firmly onto the main body,
ensuring the cord clip is on the same side as the mains cord hooks. The handle
is correctly installed when both the cord clip and the cord hook are facing
towards the back of the unit.
3. Once the handle is affixed to the unit, drive one of the 2 included crosshead
screws into the corresponding holes on either side of the handle and tighten
them using a screwdriver. Be careful not to overtighten the screws, as this
could cause damage to the unit.
Filling the Clean Water Tank:
WARNING!
ALWAYS fill the clean water tank before attempting to operate the unit.
1. Once the unit has been assembled, fill the clean water tank to begin using it.
2. To fill the clean water tank, begin by unplugging the unit from the mains.
When the unit has been unplugged from the mains, firmly grip the water tank
and pull the water tank handle forwards and upwards to unlock it. Once the
tank handle has been unlocked, tilt the tank away from the main body of the
unit until it detaches.
3. Once the clean water tank has been detached from the unit, unscrew the
cap by turning it counter-clockwise, and add in the included carpet cleaning
solution. Be careful to observe the instructions and measurements detailed on
the bottle when pouring the cleaning solution into the tank.
5 - Using Your Appliance
