13
Cleaning The Filters:
1. This unit is equipped with detachable exhaust and motor filters. These filters
should be periodically cleaned to ensure optimal operation.
2. To clean the exhaust and motor filters, begin by detaching the water tank from
the unit, as instructed in the section above.
3. When the water tank has been detached from the unit, open it and retrieve
the exhaust filter from inside.
4. Once the exhaust filter has been removed from the tank, rinse it under warm
running water and leave it to dry thoroughly. Take care to ensure the filter is
fully cleaning before replacing it into the unit.
5. When the exhaust filter is fully dry, place it back into its housing and insert it
back into the water tank.
6. When the exhaust filter has been replaced into the unit, pull the motor filter
out from inside the water tank and repeat the steps above to clean it. Take care
to ensure the filter is fully clean before replacing it into the unit.
7. Once both filters have been replaced, push the tank back into position inside
the main body of the unit and secure it by pushing the handle downwards
until it clicks into place.
8. The unit is now ready for normal use.
Storing the Appliance:
Note:
Before storing the carpet washer, unplug it from the mains and ensure all
parts are completely dry.
WARNING!
DO NOT store the carpet cleaner with cleaning solution or dirty water
inside the water tank. ALWAYS empty and clean the water tank prior to storing the
unit.
Store the appliance in a cool, dry place, preferably inside its original packaging, and
out of the reach of children.
Step 1
Step 2
Step 3
