Tower Hobbies T10023, Safety And Instruction Manual

Page: 8 / 15

8
• NEVER use the kettle if it has been
dropped on the floor or in any way
damaged
• This appliance is intended to be
used in household and similar
applications such as: Staff kitchen
areas in shops, offices and other
working environments; by clients in
hotels, motels and other residential
type environments; farm
houses; bed and breakfast
type environments.
• In the unlikely event the
appliance develops a fault,
stop using it immediately
and seek advice from the
Customer Support Team:
+44 (0) 333 220 6066
4 - Before First Use
1. Remove the parts from the packaging.
2. Prior to initial use, clean your kettle by going through several boiling cycles, using
clean water with each cycle and filling the kettle to its upper marking. The water will
reach boiling point after approximately 5 minutes. The kettle switches off
automatically.
3. Discard the boiled water and wait for the kettle to cool. Then rinse the kettle with
cold water.
4. Your appliance is now ready for normal use.
5. Dispose of the packaging in a responsible manner
5 - Using Your Appliance
1. Remove the lid and fill the kettle.
2. The water level must be between the MAX and MIN fill lines.
3. Replace the lid making sure it is closed correctly.
4. Ensure that both the base unit and the base of your kettle are not wet.
5. Place the kettle onto the base unit and plug in.
6. Switch the kettle on by pushing the ON/OFF switch to the ‘On’ position.
7. Your kettle will begin to boil and will switch off automatically when it is done. The
On/Off switch will automatically move into the ‘OFF’ position when done. Whilst the
kettle is boiling the LED light on the ON/OFF switch will illuminate.
8. The kettle can be switched off manually by putting the ON/OFF switch to ‘OFF’. Note:
The On/Off switch will also automatically return to the off position when it is
finished boiling.