Tower Hobbies T10023, Safety And Instruction Manual

Page: 12 / 15

12
• Fill the kettle with equal parts water and vinegar (white wine vinegar, cider vinegar or
lemon juice work particularly well). Allow the kettle to boil (pay attention that the
contents do not boil over) and let it stand for 30-40 minutes.
• When finished empty the kettle and rinse it with water.
• The kettle should now be free from limescale and can be used again.
9 - Wiring Safety for UK Use Only
IMPORTANT
As the colours in the
mains lead of this
appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
please proceed as follows:
The wires in the mains lead are coloured in
accordance with the following code:
Blue neutral [N] Brown live [L]
Green / Yellow [EARTH]
Plug Fitting Details (Where Applicable). The
wire coloured blue is the neutral and must
be connected to the terminal marked [N]
or coloured black.
The wire coloured brown is the live wire
and must be connected to the terminal
marked [L] or coloured red.
The wire coloured green/yellow must be
connected to the terminal marked with the
letter [E] or marked .
On no account must either the brown or
the blue wire be connected to the [EARTH]
terminal .
Always ensure that the cord grip is
fastened correctly.
The plug must be fitted with a fuse of
the same rating already fitted and
conforming to BS 1362 and be ASTA
approved.
If in doubt consult a qualified electrician
who will be pleased to do this for you.
Non-Rewireable Mains Plug If your
appliance is supplied with a nonrewireable
plug fitted to the mains lead and should
the fuse need replacing, you must use an
ASTA approved one (conforming to BS
1362 of the same rating).
If in doubt, consult a qualified electrician
who will be pleased to do this for you.
If you need to remove the plug –
disconnect it from the mains – and then
cut it off of the mains lead and
immediately dispose of it in a safe manner.
Never attempt to reuse the plug or insert it