TOVIS P/N
MTG-1972XN
DATE
2002.03.11
REV NO.
0
TOVIS
Color Monitor Service Manual
PAGE
13/30
2) Search “COLOR” sub-menu using “UP/DOWN” key on the
Main-Menu OSD.
3) Select the “COLOR” by pressing “SEL” key. Then the color Sub-Menu OSD
comes out as right below figure.
4) Search “USER” using “UP/DOWN” key (“COLOR1” and “COLOR2”
is adjusted in factory by an auto-alignment machine. )
5) Press “SELECT” key to adjust “RED”,”GREEN” and “BLUE”
“RED”,”GREEN” and “BLUE” is selected by pressing the
“SELECT” key and selected item changes OSD color from white to it’s
corresponding color (ex: “RED” goes to red color)
6 ) Adjust “RED”,”GREEN” or “BLUE” using “UP/DOWN” key.
7) Press “MODE” key to finish the color adjustment then the OSD goes
back to Main-Menu.
8) Press the “MODE” key again to finish the adjustment then the OSD will
disappear.
L. RECALL.
When the “RECALL” key is selected adjusted values are erased
and replaced by the factory adjustment values.
At first without any user’s adjustment, the monitor has a factory set up.
M. LANGUAGE.
There are 4 languages provided for ease of use.
(Factory setting is English)
2) Press the “MODE” key then Main-Menu OSD comes up.
3) Search “LANGUAGE” sub-menu using “UP/DOWN” key on the
Main-Menu OSD.
4) Select the “LANGUAGE” by pressing “SEL” key. Then The
Language sub-menu comes up as below figure.
TOVIS CO., LTD.
