tousek
/ E_TURN-10-20_42000705 / 16. 05. 2017
- 3 -
1. General
Swing gate operator TURN 10, TURN 20
Characteristics
• electromechanical swing gate operator for 230Va.c.
• max. weight of gate wings 350 kg
• suitable for installation at already existing gates
• incl. mounting parts
• self-locking steel spindle
• for private use, approx. 20 cycles/day
•
General features
The swing gate operator TOUSEK TURN, can be easily installed at new and also already existing swing gate facilities. The
drive unit works electromechanically and consists of a connecting rod made of stainless steel with an integrated, self-locking
spindle and a high-performance single-phase motor. These components are situated in an aluminium housing.
Due to its self-locking spindle the operator guarantees the blocking of the gate and therefore usually no electric-lock is re
-
quired.
But depending on the individual situation of assembly it may be necessary to install an additional locking (e.g. e-lock) for reach
-
ing a fix blocking of the gate in its travel limits – even at self-blocking gate operators.
A key for emergency release permits the manual opening of the gate in case of e.g. power failures.
At rising gate entrances, additionally the optional hinge joint has to be mounted.
Technical data
Drehtorantrieb
TURN 10
TURN 20
TURN 10
TURN 20
power supply
230Va.c. ± 10%, 50Hz
hoisting speed
18,5mm/s
current consumtion
1,5A
max. stroke
303mm
402mm
condenser
8µF
max. length of wing
2,5m
3,0m
max. thrust
3500N
max. weight of wing
350kg
duty cycle (S3)
20 cycles/day
max. inclination / gradient
of gate entry
10° *)
article no.
black:
silver:
left: 11260210
right: 11260220
left: 11260400
right: 11260410
left:
11260230
right: 11260240
/
other
blocking in closed position, TURN 10 also available in silver
•
Max. wing widths do neither apply to full-panel gates (but to stave or trellised gates) nor to non-horizontal gates!
*)
With rising gates the max. leaf width and gate weight have to be reduced up to 50%.
The pillar sided support bracket for the operator enables a possible gradient of up to 10°.
ATTENTION: RISK OF INJURY / DANGER OF DRIVE AND PROPERTY DAMAGE:
•
with rising / descending gates it is absolutely necessary to install a damper (e.g. a gas pressure damper) in order
to avoid uncontrolled movements of the gate leaves when the motor is released!
