- 12 -
tousek
/ EN_ST-80A_04 / 25. 03. 2020
text display
ESC
ENTER
•
Before starting the programming, please choose the language. Use the buttons
+
or
-
to choose menu langu
-
age and confirm with
.
•
Note: Language selection can also be chosen by pressing the ESC button
( )
for 5s, from any position in menu.
Programming buttons
Adjustment - overview
• For programming please remove cover
(A)
of control
device (loosen 2 bolts).
• The text display
(T)
informs you ou about operating status,
chosen menus and the adjustment of various parameters..
• The programming of the control is carried out with the help
of four buttons
(
+, -
,
(=Enter)
and
(=Escape).
• Scrolling through the available menu points (up/
down) or the adjustment of a parameter (value in
-
crease/decrease) is carried out with buttons + and –..
AUTO-COUNT:
when holding one of the buttons the value
changes automatically.
• When pressing the
-
button ea confirmation for entering the shown menu point, resp. for accepting the shown value
of a parameter is given.
• When pressing the
-
button you return to the superior menu point. Possibly changed adjustments of a parameter are
rejected with this button (the former values will remain).
•
AUTO-EXIT:
if no button is pressed during 1 min. then the menu switches automatically to the “ready” menu (wihtout
saving changed parameters).
3.2 Adjustments - overview
Barrier control board
ST 80(V)A
•
The program menu is divided into “BASIC SETTINGS” and “MENU CONTROL”
The different menu points are indicated as follows:
= selectable setting
= factory settings
= status display
G
shows the menu points which are in the “ BASIC SETTINGS”
BASIC SETTINGS
•
When entering the programming of the control unit for the first time you will see the BASIC SETTINGS
• Here the necessary adjustments which are necessary for the use of the operator/barrier can be set quickly.
• For advanced settings/programming please choose the menu point “menu (control)”.
MENU CONTROL
• For futher programming you will reach immediatly the MENU (CONTROL)
(Basis settings are skipped)
• The menu control includes all kinds of settings.
Programming menu
Adjustment - overview