tousek
/ E_LWA-115/1A_40800708 / 29. 10. 2018
- 3 -
1b
2b
3
4b
4a
2a
1a
9
3
5b
5a
6
7b
7a
73 mm
336 mm
150 mm
8
10
11
12
1. General
Aluminium cantilever system Rollco
®
LWA 115/1A
General features
The aluminum-track Rollco
®
LWS 115 with hollow chamber design is the perfect system for
cantilever gates. The integrated for plastic gear rack, limit stop and hammer head bolts (for gate
frame installation) guarantee an easy mouting. Modern, cantilever gate constructions have the
big advantage that they can glide over any ground uneveness. The rolling gear with ball bearing
polyamide rollers ensures an optimal drive guidance. The adjusting bolts on the rolling gears are
for avoiding a tilt effect when there are changes of alternation of load during gate movement.
Characteristics
• aluminium profile in hollow-chamber design with
integrated guiding for plastic gear rack and limit switch
• cantilever profile in two different stock lengths
• olling gears of galvanized steel with ball-bearing
polyamide-rollers
• smooth running and easy assembly
• optimal for use with gate operators of PULL series
• corrosion-resistant - natural aluminium
• gate frame without drilling on track
• load weight up to 40kg/m, gate cycles: max. 50/day,
weight: approx.. 5kg/m
•
(1a)
front end plate with lateral
plastic guidings
(1b)
back end plate
(2a)
front seal (V)
(2b)
back seal (H)
(3)
clamping (for gear rack)
(4a)
front limit stop with rubber
bumper and support roller
(4b)
back limit stop with
rubber bumper
(5a)
T-head bolts single
(5b)
T-head bolts double
(6)
profile
(7a/b)
front/back rolling gear
and mounting plate in
stainless steel
(8)
rolling gear cover
(9)
guide-in bracket
134
70
108
189,5
105
0–12
3
140
87,5–99,5
10
11
12
6
7
(10)
opening for T-head bolts for
connection with the gate frame
(11)
guiding for limit switches
(12)
guiding for plastic gear rack
CLOSING direction
Technical data
Aluminium cantilever system Rollco
®
LWA 115/1A
Art.Nr.
Aluminium profiles
load capacity: 40kg/m, weight: ca. 5kg/m, frequency of actuation: 50 cycles/day
for max. DL 3.000mm ± 10mm
4.300mm profile length
± 10mm natural aluminium
14630200
for max. DL 4.300mm ± 10mm
6.000mm profile length
± 10mm natural aluminium
14630020
for max. DL 5.800mm ± 10mm
8.000mm profile length
± 10mm natural aluminium
14630030
Rolling gear LWA 115/1A
2 units necessary!, made of galvanised steel (adjustable in height and inclination)
with polyamide rollers, incl. covers for rolling gear
14630080
optional accessories
INOX mounting plate, heavy-lift anchor, motor mounting plate for tousek sliding gate operators, end plates (aluminium), limit
stops with and without support rollers, guide-in bracket (aluminium), guide bracket (stainless steel), turnbuckle (stainless
steel), guide-in fork bracket (stainless steel), T-head bolts (stainless steel), gear rack (plastic)
ATTENTION: The assembly of cantilever system and gate may only be carried out by trained and qualified
professionals. For perfect function and avoiding damages at the cantilever system, the following planning- and
processing rules have to be strictly followed!
