- 10 -
tousek
/ E_LWA-115/1A_40800708 / 29. 10. 2018
2f. Mounting the rolling gear covers
Mounting
• When installation of the cantilever system is finished put
both parts of the covers on each rolling gear, one from the
left and the other from the right, and push them together.
Z
3
3
• The plastic gear racks
(Z)
(parts of 49 cm length) have to
be sequentially lead in the foreseen guiding at the profile.
• It has to be taken care that they touch each other without
gaps.
• The two clampings
(3)
serve as fixation of the gear rack,
they are also lead in the guiding for the gear rack at both
ends of the profile and fixed with screws.
Attention
• If a guide-in bracket (9) is used, the front clamping
has to be mounted with at least 125 mm distance
to the profile end, to make sure that the profile runs
properly in the guide-in bracket !
2e. Mounting the gear rack
Mounting
125mm
Z
9