TouchTunes Playdium, Installation And Setup Manual

Page: 19 / 24

Installing the Playdium Floor Stand
Levelling the Floor Stand
Playdium Floor Stand Installation and Setup Guide 900857-001 Rev 00
19
13. With the red lever in vertical position, lift the core and insert it back into the chassis.
14. Pull the pin on the red lever then pull the lever up slowly.
15. Push the core down while pulling the lever up, until the lever snaps back into place and the core is fully
docked.
16. Put the Floor Stand’s top panel back into place, and fasten with the screws you removed earlier.
17. Fasten the back panel back into place with the eight (8) screws you removed earlier.
Levelling the Floor Stand
Ensure that the Floor Stand and Playdium are now in their final position.
Use a spirit level to verify that the Floor Stand is level. If the Floor Stand is not perfectly level, use the set screws
in your parts kit to adjust the leveling as needed.
Your Floor Stand-mounted Playdium is now ready to be turned on. Remember to lock the payment panel after
you close it.