TouchTunes Playdium, Installation And Setup Manual

Page: 13 / 24

Installing the Playdium Floor Stand
Assembling the Floor Stand
Playdium Floor Stand Installation and Setup Guide 900857-001 Rev 00
13
4. Remove the eight (8) screws of the back panel, and pull off the panel.
5. Using the four (4) flanged screws and washers provided with the baseplate, fasten the lower half of the Floor
Stand to the baseplate.
6. Remove the screws holding the top panel to the top of the Floor Stand’s upper half, then pull off the top
panel. This panel must be removed, otherwise it will prevent you from hanging Playdium onto the stand.