TouchTunes Playdium, Installation And Setup Manual

Page: 16 / 24

Playdium Floor Stand Installation and Setup Guide
Installing the Playdium Floor Stand
Mounting Playdium onto the Floor Stand
16
Mounting Playdium onto the Floor Stand
1. Partially install mounting screws (provided in your parts kit) into the middle two (2) mounting points on the
top part of the Floor Stand. The screws have to be sturdy enough to support Playdium, while they must also
protrude enough to make it easy to hang Playdium onto them.
2. Unpack Playdium and take out the core, as per the instructions in its Quick Start Guide. After the core is out,
push the red lever back into horizontal position, and close the payment door.
3. Carefully lift the Playdium chassis up to the Floor Stand, and align the middle two mounting holes with the
screws you just installed into the Floor Stand. Hang the chassis onto the two screws.
Note:
In the illustration above, the payment door has been removed to better show the mounting holes.
Your chassis will have its payment door closed, at this point.