1) Install Power
Connect the Red wire to a co12v battery power source. Note: For best performance, run a
clean +12v (15A) directly from the battery or a fuse that is NOT supplying any power to motors,
lights or any other type of high current device.
2) Install Ground
Connect the Black wire to chassis ground
A) Scrape all paint and grease away from the body frame.
A loose chassis ground connection WILL cause intermittent operation of receiver.
B) Clean the area using an alcohol based cleaner to remove paint chips and grease.
C) Crimp a #10, 3/16” ring terminal onto the black ground wire.
D) Insert the ring terminal and a #10, 3/16” star washer over a 10x3/4” hex head,
self-tapping ground screw.
E) Tighten ground screw securely into clean frame area.
3) Install Outputs - Maximum output is 5 Amps per channel
A) Connect
only
One
Channel output wire at a time to a relay or function which uses 5 Amps
B) Solder connections and protect with shrink tube or use an 18g insulated butt terminal.
Page -5-
Installation: Electrical Connections
PowerTouch Remote Control Systems - 914 Series (2 - 4) Functions
Manual C914.N2
Channel
Channel 1
Channel 2
Channel 3
Channel 4
Output
(+) positive
RR@G
(+) Positive
RR@G
(+) Positive
(+) Positive
Wire
Color
Green / Black
Green / Red
Yellow / Black
Yellow / Red
Tan
White / Tan
Max
Output
5 Amp
5 Amp
5 Amp
5 Amp
5 Amp
5 Amp
Pin
Position
09
07
08
06
10
12
4) Wiring Inspection
A) Check all wiring
connections visually
B) Check the polarity
of all wires
C) Tape off or remove
all unused wires.
See Diagram on Page 4 - ‘Installation: Receiver’
Input
+
+
-
Wire Color
Red
Purple
Black
Max Input
1 Amp
15 Amp
1 Amp
Pin Position
01
11
03
Logic Power
Relay Power
Ground
See Diagram
on Page 4
Orange - Pin 4 - Not Used
30
87a
85
86
87
N.C.
N.O.
Relay 4
87a
85
86
87
N.C.
N.O.
30
87a
85
86
87
N.C.
N.O.
Relay 3
30
87a
85
86
87
N.C.
N.O.
30
87a
85
86
87
N.C.
N.O.
Relay 2
30
87a
85
86
87
N.C.
N.O.
30
87a
85
86
87
N.C.
N.O.
Relay 1
30
87a
85
86
87
N.C.
N.O.
Channel 4
Channel 3
Channel 2
Channel 1
Pin 7 - Green / Red
Ground
Pin 4 - Orange Do Not Use
Pin 3 - Black Chassis Ground
Pin 1 - Red +12v Power
Pin 9 - Green / Black
Pin 6 - Yellow / Red
Pin 8 - Yellow / Black
Pin 12 - White / Tan
Pin 11 - Purple Power
Pin 10 - Tan
Board Jumper
PowerTouch Receiver / Relay Schematic
+1
+2
+3
+1
+2
+3
+1
+4
+2
+5
+3
+6
+12v
Fused
Ground
M
Application for Doors and Windows
Master
Relay
System
Switch 1
Switch 2
Door
Lock
or
Window
Switches
Master
Relay
DPDT(DM)
Door Lock or
Window Motor
+12v
Fused
914 PowerTouch
Green/Red Wire
914 PowerTouch
Yellow/Red Wire
Relays may differ
from manufacturer
to manufacturer.
-2
+1
+3
-4
+5
M
Slave Switch
Door Lock or
Window Motor
914 PowerTouch
Green/Red Wire
914 PowerTouch
Yellow/Red Wire
Reversal Rest @ Ground Switch System
-2
+1
+3
-4
+5
Master Switch
914 PowerTouch
Green/Black Wire
914 PowerTouch
Yellow/Black Wire
Cut
Door Lock or Window Switches
