8
Remote Control Panel
Power
Press the power button on the remote to turn the flame on and off.
Heat Control
Press the heater button once and indicator lights up. Ten seconds after the mechanism
is activated,warm air will be produced through the air outlets at the bottom. Press the same button again
and the indicator lights up. The air outlets will produce hot air. Press the same button a third time,
and the mechanism stops functioning after blowing out the remaining air in 10seconds.
Simulated flames
Press either the
〝
+
〞
or the
〝
-
〞
button, the indicator light will brighten up or
dim the flames.
Remote Control Device
Point it directly towards the fireplace and it functions within a distance of
approx 10 feet.
【
Cleaning the exterior of the appliance
】
•
Before cleaning the appliance, disconnect it from the socket and leave to cool.
•
You can clean the exterior of the heater with a soft, damp cloth.
•
Do not use cleaning or polishing products.
【
Manufacturers guarantee
】
There is guarantee of one year. During this period, faulty components will be repaired or replaced free of
charge, if the fault is due to a manufacturing defect.
In this case, consult the retailer where you have purchased the appliance.
(Below some more instructions for the approved electrician who carries out maintenance or repairs to
your Fireplace heater):
Appliance comes with the following led light :
80006
4pcs 1W light bulbs (max. 4W)
