background image

7.  This  product  should  be  operated  from  the  type  of  power 
indicated on the marking label. If you are not sure of the type of 
power available, consult your dealer or local service company.

8. This product is equipped with a 3-wire grounding type power 
plug, a plug having a third (grounding) pin. This plug will only fit 
into a grounding-type power outlet. This is a safety feature. If you 
do  not  have  proper  outlet  to  insert  the  plug,  contact  your 
electrician  to  replace  your  obsolete  outlet.  Do  not  break  the 
ground pin and circumvent the grounding. 

9. Do not allow anything to rest, or persons to walk on the power 
cord.

10. If an extension cord is used with this product, make sure that 
the total ampere rating plugged into the extension cord does not 
exceed the maximum ampere rating of the extension cord.

11. Never insert any object/tool of any kind through housing slots 
of  this  product  as  they  may  touch  dangerous  voltage  points  or 
short  out  components  that  could  result  in  risk  of  fire  or  electric 
shock.  Never  spill  liquid  of  any  kind  on  the  product  (except  IP-
rated models).

12. Do not attempt to service this product yourself, always refer 
to qualified or authorized person for the servicing of this product.

13.  Unplug  this  product  from  the  wall  outlet  and  contact  a  
qualified service provider in the following circumstances:

When the power cord or plug is damaged, frayed or broken.

In the event that liquid has been spilled into the product (except 
IP-rated models).

3

Summary of Contents for LED Duo






















Reviews: