TouchIT LED Duo, Manual

Page: 8 / 21

2-2 Optional Connections:
This TouchIT LED Duo is designed to work with second signal
source. Please enter OSD menu to switch between these signal
sources and other adjustments
2-2-1 DVI connection (optional cable):
Plug one end of the DVI signal cable to signal source (PC, or, IPC,
or, media player of any kind with proper DVI out port), and the
other end to the DVI connector on the TouchIT LED Duo. Tighten
the connector screws on both ends of the cable to secure good
signal connection.
2-2-2 VGA output connection (Optional male to male VGA
cable):
Plug one end of the VGA signal cable to signal source and the
other end to another VGA in connector to daisy-chain, or
establish a cascading signal to the other TouchIT LED Duo.
Tighten the connector screws on both ends of the cable to ensure
a good signal.
2-2-3 USB cable connection
Plug one end of the USB cable to the USB connector at the rear
of the (PC, or, IPC, or, media player), and the other end to the
USB connector on TouchIT LED Duo.
7