Using Your PolyVision Interactive Whiteboard
23
Po
ly
Vis
ion
®
Using Your PolyVision Interactive Whiteboard
Using Dry-Erase Markers with Your Board
Your PolyVision whiteboard senses writing and erasing that you can print or
save by detecting pressure.
•
Use only the eraser provided with your whiteboard.
•
Use firm consistent pressure.
•
Make sure there is only one point of contact at a time.
note:
NOTE:
The whiteboard surface can be damaged by sharp objects such as
ballpoint pens and rulers.
To write on the board so it can be saved or printed:
1
Choose a dry-erase marker.
2
Press an ink color button on the remote control (Walk-and-Talk
models) or tap a pen color icon on the whiteboard (TS models)
corresponding to the marker color.
3
Write on the board.
When you write on the board:
•
Walk-and-Talk models:
the red “Ink Recorded” LED glows to indicate
that the computer has detected your writing. Refer to “LED and Status
Messages on the Walk-and-Talk Whiteboard” on page 12.
•
TS models
: the whiteboard provides audible feedback and the green
LED glows brighter to indicate that it recognizes your strokes.
You can print or save your notes as a digital image on your computer. To
save your writing:
•
Press the Print or Save button on the remote control (Walk-and-Talk
models) or tap the Print or Save icon on the whiteboard (TS models).
A snapshot of the writing is saved on your computer.
To erase so it is recorded:
•
Walk-and-Talk models:
erase using the large circular felt eraser
provided. The battery-operated eraser sends infrared data to the
computer through the whiteboard.
PolyVision I&O.book Page 23 Thursday, October 16, 2008 4:18 PM
