23
4. To enable the power, select COM2
,COM3 or COM4 Power setting and
press <Enter>. Select Power and
press <Enter>. Save the change
by pressing F10.
1. Power on the system, and press
the <DEL> key when the system is
booting up to enter the BIOS Setup
utility.
2. Select the Advanced tab.
3. Select
VGA/COM Power and LCD
Brightness Configuration
Ports
and press <Enter> to go to display
the available options.
COM1/COM2/COM3 Power Setting
COM1, COM2 and COM3 can be set to provide power to your serial device.
The voltage can be set to +5V or +12V by setting jumper JP8 and JP9 on the mother-
board. When enabled, the power is available on pin 10 of the RJ45 serial connector.
If you use the serial RJ45 to DB9 adapter cable, the power is on pin 9 of the DB9
connector. By default, the power option is disabled in the BIOS.
Summary of Contents for QK10 AIO
Page 1: ...USER MANUAL VERSION 1 3 December 2015 QK10 All in One...
Page 9: ...ix The page is intentionally left blank...
Page 11: ...2 1 2 Optional Items MSR...
Page 38: ...29...
