10
TSP Quick Start Guide
wings should fully illuminate. Now click on the button labeled “Lights Off”. Both light wings should
turn off. If operation is not proper, verify that the photocell is installed, properly twisted in place,
and covered with electrician’s tape. Also ensure that both wings are properly plugged into the
controller card.
Alternatively, you may also verify lighting operation from the Lighting Controller window. Browse
to the IP address assigned to the
Lighting Controller
earlier in the setup process.
When selected,
Light Level
radio buttons apply indicated percentage off brightness until another
radio button is selected.
Light Pattern
radio buttons
activate predefined lighting scenarios.
The Photocell Override
allows for lighting to be turned on/off, even if the photocell is exposed to
light.
To ensure correct light responses, make sure that when testing is complete the
Photocell Override is turned OFF.
