Totoku LV32E2, User Manual

Page: 8 / 56

- 6 -
ENGLISH
4
Secure the bracket to the chassis of the computer.
Note: When the bracket is not installed completely, the DVI cable cannot be inserted
all the way in. You can connect the DVI cable supplied with the display to the graphics
card first, and then secure it to the chassis.
5
When installing two LV32E2/LV32P4 cards, repeat the above steps until all cards are
installed.
Note: There is a limit to the number of the cards one computer can take, which
vary according to the types of cards, operating systems, and display drivers. Do not
exceed the number limit.
6
Put the cover back on the computer.
Connecting the display
1
Connect the DVI cable supplied with the display between the graphics card's DVI
connector and the display and tighten the screws.
Do not connect/disconnect the DVI cable while the display is turned on. It could
cause a graphics card failure. Connect/disconnect the DVI cables with the
display disconnected.
Caution
LV32E2
Attention: This graphics card has two DVI connectors; A and B. Make sure to
connect the first display to Connector A .
Connect the second display
(on the right)
DVI Connector B
Connect the first display
(on the left)
DVI Connector A
PCI Slot
A
B
LV32P4
• Connect the supplied DVI branch cable to LFH60 on the card and tighten the screws on
the connector.
Note: Do not force the connector into the card at an angle. It could damage the
connector pins or the mold.
• Connect the DVI cable supplied with the display between the branch cable's DVI
connector and the display and tighten the screws.
Attention: This branch cable has two DVI connectors. Make sure to connect the first
display to " 450MMS-2/4 ."