Totoku LV22P2, User Manual

Page: 20 / 64

- 8 -
ENGLISH
4. Multi-Display Modes
About multi-display modes
The following modes are available:
•
Independent Mode
(Dualview): Two displays connected to the same card are working
independently and separately
• Stretched Mode (Horizontal/Vertical span): Two displays connected to the same card
are combined into one desktop
• Single Display Mode : Only one display
• Clone Mode : Two displays connected to the same card display the same image
respectively.
Note:
• The independent mode is not available in Windows NT 4.0. Also, two cards cannot be
used in Windows NT 4.0.
• The stretched mode is not available in portrait orientation realized by "NVRotate."
Mode
Display/card 2 Displays/card
4 Displays on 2 Cards
(2 Displays/card)
Independent
Mode
2
1
1 2 2 1 3 4
Stretched
Mode
1
2 1
Single Display
Mode
1
Clone Mode
1 1
1 1 2 2
Changing multi-display modes
Display the Quadro NVS 55/280 PCI or Quadro NVS280 PCI menu:
• Windows 2000/XP: Select Display Properties>Settings (tab) and select a subject
display's icon. Select Advanced>Quadro NVS 55/280 PCI (tab).
• Windows NT 4.0: Select Display Properties>Quadro NVS 280 PCI (tab).
Note:
• When another graphics card(s) coexists, the
Quadro NVS 55/280 PCI
or Quadro
NVS280 PCI tab will not be found. In this case, displays connected to the other card
must be detached (right-click and uncheck "Attached") for now.