Totoku LV22P2, User Manual, Page: 18 / 64

- 6 -
ENGLISH
Windows NT4.0
Installing the software
Turn on the display and start up the computer in VGA mode.
2
Confirm that the VGA boot screen appears followed by the Windows startup screen.
3
Log into Windows as a user with administrative privileges.
4
Insert the driver CD to the CD-ROM drive on the computer.
5
Run Driver_CD/NT4/Setup.exe included in the CD and follow the on-screen
instructions to install the driver.
Note: During installation, the screen may go blank. This is normal. Please wait for a
moment.
6
Restart the computer.
Setting up the display settings
Make sure to restart the computer before moving on to the next.
Log into Windows as a user with administrative privileges.
2
When 2 displays are connected, the NVIDIA nView Setup Wizard appears. Click
"Cancel." (It can be set up later on.)
3
Follow the instructions below to set the screen resolution and color:
1) Select Display Properties>Settings (tab).
2) Select a predetermined screen resolution using the slider.
Predetermined resolutions
Resolution Landscape Display
2MP 1200 x 1600 ME203L, ME213L, ME253i2
2MP 1600 x 1200
ME203L, ME213L, ME251i, ME201L, ME253i2,
CCL202, CCL204, CCL212, CCL250i
1MP 1280 x 1024 ME181L, CCL182
3) Select "True Color" for the color setting and click "Test" to run the test.
4) When a confirmation message to start the test appears, click "OK."
5) Verify that images are displayed properly. Click "Yes" to the confirmation message.
6) Click "OK."
4
When 2 displays are connected to the card, multi-display setup is required. See the
Multi-Display Mode section.
5
Remove the driver CD from the CD-ROM drive.
Windows NT4.0