8
Safety Precautions
(Continued)
CAUTION
To prevent a sudden water leak, do not remove the water
fi
lter drain valve
when the shutoff valve is open.
Doing so will cause water to spurt out.
(Refer to Page 31 for instructions on cleaning the water
fi
lter drain valve.)
Do not fold or crush the water supply hose; do not damage by cutting with a
sharp object.
Doing so may cause water leaks.
Do not install the base plate, which is not attached.
Doing so could cause a
fi
re or damage.
If a water leak should occur, always close the shutoff valve.
When the ambient temperature is likely to drop to 0°C or lower, prevent
damage to the pipes and hoses due to freezing.
Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.
Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.
Drain the water.
When not using the Washlet for a long time, close the shutoff valve, drain
the water from the main unit and water supply hose, and then turn off the
breaker on the distribution board.
When using the product again, allow the product to re
fi
ll with water
fi
rst.
Otherwise, the water in the tank might become contaminated and cause skin in
fl
ammation or
other problems. (Refer to Page 39 for instructions on replenishing the water.)
Leaving the power on may cause
fi
re or heat.
When installing the water
fi
lter drain valve, make sure that it is securely
tightened in its proper position.
Failure to securely tighten it may cause a water leaks.
Push the main unit securely on to the base plate.
After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure that
the product does not detach.
Failure to do so could cause the main unit to come loose and fall resulting in injury.
Summary of Contents for Washlet TCF6530 Series
Page 47: ...47 Reference...