31
3
Water
fi
lter drain valve
(Perform once every 6 months)
<If you think the water pressure has weakened>
1
Close the shutoff valve.
The water supply stops.
CAUTION
Do not remove the water
fi
lter drain
valve while the shutoff valve is open.
(Otherwise, water may leak out)
2
Extend the wand.
Operate with the buttons on the back side
of the remote control.
(1)
Press [MENU].
(2)
Use
to select "CLEANING".
Press [ENTER].
(3)
Use
to select "WAND
CLEANING MODE ON/OFF".
Press [ENTER] to extend the
wand.
Press [ENTER] again to retract
the wand.
(Release the pressure from the
water supply pipe.)
3
Switch the breaker on the
distribution board to OFF.
4
Remove the cover and water
fi
lter drain valve.
Loosen with a
fl
at-head screwdriver and
then pull.
Cover
Water Filter Drain Valve
5
Clean with a tool such as a
toothbrush.
Also, remove any dust from inside the hole
of the water
fi
lter drain valve.
6
Reinstall the water
fi
lter drain
valve and cover.
Insert the water
fi
lter drain valve and tighten
it securely with a
fl
at-head screwdriver.
7
Switch the breaker on the
distribution board to ON.
The POWER LED lights up.
8
Open the shutoff valve.
Maintenance
Summary of Contents for Washlet TCF6530 Series
Page 47: ...47 Reference...