11
ENGLISH
Liquid soap
MAX fill line
Tank
Pump unit
REFILLING THE SOAP
1.Open the cover.
2.Remove the tank from the controller.
3.Remove pump unit from the tank.
4.Slowly pour liquid soap into the tank.
6.Mount the tank to the controller.
7.Close the cover.
5.Replace the pump by pushing it down firmly
over the tank opening until it snaps in place.
NOTE: Fill the tank up to MAX fill line.
NOTE: Use only TOTO approved liquid soap.
Tank
Cover
Controller
Tank
Cover
Pump unit
Bottom of Pump
NOTE: Clean container before refilling.
8.Purge the line by holding hands
under spout until soap is discharged.
Dispenser can be actuated up to
ten times consecutively while
holding hands under the spout
immediately after refilling .
The soap dispenser keeps track of soap usage by counting
soap dispenses.
It displays a flashing green LED indicator light to signal low
soap level.
A power interruption (AC type) or changing batteries (DC type)
disrupts the count and could prevent the indicator light from flashing.
To ensure accuracy, always add soap to the MAX line once
power is restored.
