10
TESTING
HOW TO USE THIS PRODUCT
Place hands under spout.
150±15mm
5-7/8"±5/8"
After installation is complete, confirm
that the dispenser is working properly
using the following method.
1.Place your hands under the spout
and hold them in place until soap
is discharged.
● Proper amount of soap is dispensed
automatically.
Caution: Please do not put liquid soap
on the spout. If the sensor
gets dirty, it could cause malfunction.
Sensor sensing range is
5-7/8"±5/8"(150mm±15mm).
Caution: Please do not obstruct the
spout opening.
The soap might go flying off
in an unexpected direction.
NOTE: Make sure there is no soap
leaking from the tube and connections.
Sensor
window
ENGLISH
