About the built-in seat sensor
When you sit on the toilet seat, the seat sensor turns ON,
enabling you to use various features.
(The deodorizer starts when the
seat sensor makes a detection.)
Sit so your skin is in direct contact
with the seat sensor. The seat
sensor may not detect properly if
there is a seat cover or clothing.
Water droplets collecting on the
seat sensor may cause the main
unit to malfunction. Be sure to
wipe off any water droplets on the
sensor.
4 cm
8 cm
12 cm
<Detection range>
8
9
CAUTION
If a water leak should occur, always close the shutoff valve.
When the ambient temperature is likely to drop to 0 °C or lower, prevent
damage to the pipes and hoses due to freezing.
x
Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.
x
Regulate the room temperature to prevent the pipes and hoses from freezing during cold
months.
x
Drain the water.
When not using the product for a long time, close the shutoff valve, drain
WKHZDWHUIURPWKHPDLQXQLWDQGZDWHUVXSSO\KRVHDQGWKHQÀLSWKHSRZHU
switch to "OFF".
x
:KHQXVLQJWKHSURGXFWDJDLQDOORZWKHSURGXFWWRUH¿OOZLWKZDWHU¿UVW2WKHUZLVHWKHZDWHULQ
WKHWDQNPLJKWEHFRPHFRQWDPLQDWHGDQGFDXVHVNLQLQÀDPPDWLRQRURWKHUSUREOHPV
(Refer to Page 59 for instructions on replenishing the water.)
x
/HDYLQJWKHSRZHURQPD\FDXVH¿UHRUKHDW
:KHQLQVWDOOLQJWKHZDWHU¿OWHUGUDLQYDOYHPDNHVXUHWKDWLWLVVHFXUHO\
tightened in its proper position.
x
Failure to securely tighten it may cause a water leak.
,IWKHERZOXQLWLVFORJJHGÀLSWKHSRZHUVZLWFKWR2))DQGUHPRYHWKH
clog.
x
,IWKH$XWRÀXVKLQJ
*1
LVDFWLYDWHGLWZRXOGPDNHWKHZDVWHZDWHULQWKHERZOXQLWRYHUÀRZDQG
may result in water damage.
x
Use commercially available tools that are made for unclogging the bowl unit to remove the
clogging.
Push the main unit securely on to the base plate.
x
After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure
that the product does not detach.
x
Failure to do so could cause the main unit to come loose and fall resulting in injury.
Make sure of the plus and minus signs on the batteries before inserting
them.
Remove depleted batteries immediately.
When replacing the batteries:
Replace both batteries with new ones.
Use the same brand for both new batteries (any brand available).
x
)DLOXUHWRGRVRPD\FDXVHWKHEDWWHULHVWROHDNÀXLGJHQHUDWHKHDWUXSWXUHRULJQLWH
When the product is supposed not to be used for long time, remove the
batteries from the remote control.
x
)DLOXUHWRGRVRPD\FDXVHWKHEDWWHULHVWROHDNÀXLG
2QO\DSSOLHVWRWRLOHWVZLWKD$XWRÀXVKLQJIXQFWLRQ
Safety Precautions
(Continued)
Operational Precautions
■
For prevention of malfunctions
●
Do not block the body sensor or the remote control
transmitter or receiver.
< About the body sensors >
Two types of body sensors are used.
●
Body sensor A detects changes in heat.
x
'HWHFWLRQPD\EHGLI¿FXOWZKHQWKHURRPWHPSHUDWXUH
exceeds 30 °C, such as in the summertime.
x
When sunlight is directly on the sensor area or a heater is
used in the bathroom, the sensor may detect incorrectly
due to the heat, resulting in the automatic operation of
functions such as auto lid opening and closing.
x
When the bathroom door is open, the sensor may detect
people who pass to the front or side of the toilet.
●
Body sensor B detects when someone stands in
front of the toilet bowl.
x
Body sensor B emits an infrared beam as shown in the
¿JXUH:KHQVRPHRQHPRYHVLQWRWKHOLQHRIWKLVLQIUDUHG
beam, the sensor detects the person.
'HWHFWLRQE\WKHVHQVRUPD\EHGLI¿FXOWZKHQWKHWRLOHW
is used by someone small, such as a child.
Body sensor B
Body sensor A
■
For prevention of damage
●
Wipe plastic areas
such as the main unit
and remote control
with a soft cloth tightly
wrung out with water.
Dry cloth or tissue
●
Do not lean against
the toilet lid.
■
For prevention of malfunctions and failures
●
Flip the power switch to OFF if there is a risk of
lightning.
●
A toilet seat cover or a toilet lid cover cannot be used.
(The seat sensors may not function properly.
Additionally, the toilet seat and lid may not open or
close properly.)
Covers
●
Do not urinate on the main unit, toilet seat or wand.
(Doing so may cause a failure or discoloration.)
●
Do not apply strong forces to the control panel of the
remote control.
●
When using a toilet cleaner to clean the toilet, rinse it
off within 3 minutes and leave the toilet seat and toilet
lid open.
(If vapor from a toilet cleaner enters the main unit, it
may cause a malfunction.)
x
Wipe off any cleaner that remains on the bowl unit.
●
Do not use the product with the toilet lid removed.
●
Do not expose to direct sunlight.
(Doing so may cause changes in color, irregular
heated seat temperature, remote control malfunction
or the product malfunction due to the change in
temperature.)
●
Use radios, etc. away from the product.
(The product could cause interference with the radio
signal.)
●
If you use a booster seat for infants or a soft highchair,
remove it after use.
(Keeping it installed may prevent some of the
functions from being used.)
●
Do not apply force to the remote control.
(May cause malfunction.)
x
To prevent the remote control from being dropped,
set it in the hanger when you are not using it. Be
careful not to expose it to water.
●
Do not place anything on top of the toilet seat.
Additionally, do not press it by hand.
(Doing so may activate the seat sensor, causing the
ÀRRUWRJHWZHWLIEXWWRQVRQWKHUHPRWHFRQWURODUH
touched and warm water comes out from the wand.)
Introduction
