STEP
9
-
STEP
10
Install the Drain cup
Remove the drain cup unit
2 .Turn the drain cup unit
clockwise (About 45 degrees)
1 .Pull the drain cup unit
firmly to the drain part
then release it.
3 .Pull the drain cup upwards
and out
Drain cup Unit
Main Drain
Body
●
●
If the drain cup is accidentally
removed, begin the process over
from the beinning.
1.Insert the drain cup into the main drain
body
3.Pull firmly on the drain cup unit, being
careful not to remove it, then release it.
4. Push the drain cup unit in.
2
.
Turn the drain cup counter-clockwise
making the cross-bar align with the
notches in the angles.
Main Drain Body
Drain cup Unit
Cross-bar
Angle
Drain cup unit
Main Drain Body
Notch
Cross Bar
Angle
Notch
drain cup unit
Click!
Push the drain
cup in until you
hear a “click”.
Pull Firmly
Drain cup Part
STEP 9
Attach the controller cover
STEP 10
Install the Drain
After checking the connectors are
securely attached, cover the controller.
Cover
Intall the main drain body, Gasket, washer,
and Lock Nut in that order.
Gasket
Washer
Lock Nut
Gasket
Main Drain Body
If the drain cup unit does not
come out, put it back, and and
while turning it clockwise once
again, slowly pull it out.
(Ryohan™
only).