Install
the drain
8) Confirm with Set-up
Diagram and install the
spout (Wall Mount only)
Installation Procedure
8
Fasten the spout with tool
STEP
1
?
STEP
3-A
Not included
1
Water supply
pipe
3
Mount the two water inlet
bracket on the wall
4
Connect the controller
to the water inlet bracket
7
Attach the connector
to the controller
2
Remove the controller cover
5
Cut the spout
connecting hose
if neccessary
6
Connect the spout
connecting hose
to the controller
9
Attach the controller cover
STEP
1
Water supply pipe
Before installing the faucet, be sure to thoroughly flush away any foreign matter
such as dirt and sand trapped in the water supply pipe.
STEP
2
Remove the controller cover
Pull and open the controller cover to the
direction as shown right.
STEP
3-A
Mount the water inlet bracket on the wall
?
Mount the water inlet bracket on the
wall and temporarily tighten the screws.
?
Make sure that the controller can be
attached to the water inlet bracket.
?
Tighten the water inlet bracket with
the three self tapping screws.
Note: Anchors for wall may be needed.
Be sure to mount the water
inlet bracket in the correct
direction.
Otherwise, the strainer on the
water inlet bracket will be
inaccessible for cleaning.
Caution
To be continued on the back
Self tapping screw
Water inlet
bracket
Wall anchors
(not included)
IN
10
Pull
Controller Cover
STEP 2